Though a washer is weighed by the single responsibility of stain, dirt, and germ removal, its behind-the-scene perks bring necessary convenience to our lives. A well-performing washer shepherds your routine along, leaving extra time to spend with family, catch up on work, or rediscover the wonderful art of relaxation. That’s why you invested in the Whirlpool brand: it’s manageable, it’s affordable, and it’s dependable. That is until the cycle ends and you open the lid to a Whirlpool washer not draining.
How to Troubleshoot a
Whirlpool Washer Not Draining
A Whirlpool washer not draining is a typical problem, but that doesn’t mean a washer drum of sweater soup isn’t frustrating. The good news is that it could possibly be resolved without a professional assessment. How do you fix a whirlpool washer that won’t drain? Your days of typing “clothes still wet after wash cycle” into a search engine end here. You already know what happened, but to get to the how or why your Whirlpool washer does not drain requires some simple troubleshooting.
Drain Hose is Clogged
A kink in the drain hose is a strong contender as to why your washer won’t drain. A drain hose draws water from the tub during the spin cycle, looping to the top of the unit then down to the drain, enabling the tub to fill. Kinks in the hose can cause inadequate water flow. Reinstating the flow to your Whirlpool washing machine drain hose is a fairly easy procedure.
- Unplug the washer and remove wet clothes from the drum.
- Pull the washer out from the wall enough for you to maneuver behind it.
- Locate the drain hose behind the washer.
- Place a couple of towels and a bucket underneath the hose to catch the standing water.
- Remove the clamps with a screwdriver and detach the drain hose over your trusty bucket.
- Use a plumbing snake or a straightened wire hanger to remove any debris, adjusting any kinks or dents in the hose.
- Reattach the hose before running a test cycle to ensure the issue doesn’t persist.
Drain Pump Filter is Obstructed
Out of the possible causes, a clogged drain pump is the most frequent culprit for your Whirlpool washer not draining. The primary function of the drain pump is to force water from the bottom of the unit into the drain hose. It’s plausible that a small article of clothing or loose change could be blocking the pump.
First, remove the bottom access panel, placing a shallow baking tray underneath to collect the extra water. Second, turn the knob counterclockwise to remove the drain pump. Using your finger, fish out any clothing or debris from the pump’s propellers. Next, hold the pump under running hot sink water to give it another once-over. Lastly, twist the pump back into position and reattach the panel. As with the drain hose, perform a test cycle to see if the problem is fixed. If not, you might need an expert diagnosis.
Faulty Whirlpool Washer Parts
If your washer won’t drain after going through these suggestions, you could have a defective part on your hands. For example, a washer won’t drain or spin if the door or lid isn’t securely closed. This means that you could have a faulty lid switch assembly on your hands. Try pressing the lid switch with your finger. If nothing happens then the switch needs immediate replacement.
Whether you require professional repair or washer maintenance tips, the experts at Action are ready to help. For the best Whirlpool washer repair Providence has to offer, contact Action Appliance Repair today.